News & press releases

Filter reports

Period

Subject

Hits 241-250 of 734

Press releases | 08/11/2021

Sardinia – Liebherr LTM 1120-4.1 mobile crane with long boom in action at a refinery

The requirements placed on mobile cranes for working in refineries are wide-ranging – long booms, compact design and, above all, high safety standards. The new Liebherr LTM 1120-4.1 mobile crane supplied to the specialist in the construction and assembly of industrial plants, Mintor Srl, was able to demonstrate its strengths recently when carrying out repair work in one of the largest refineries on the Mediterranean. At 66 metres, the 120 tonne crane has the longest telescopic boom in the 4-axle class and can hoist loads which were previously the domain of 5-axle cranes. Find out more

Press releases | 08/10/2021

Number two: Paradiso takes delivery of Liebherr LG 1750 lattice boom mobile crane

The crane rental company Fratelli Paradiso S.r.l. has taken delivery of a Liebherr LG 1750 lattice boom mobile crane. It is already the second crane of this type in the fleet of the company from the Apulia region in the south of Italy. It will be used mainly for the assembly of wind turbines. The high demand in this area in Italy and the good experience with this type of crane were the reasons for the decision to purchase another LG 1750. Find out more

Press releases | 08/05/2021

Time-tested concept – Max Bögl Group takes delivery of another Liebherr LTR 1220 telescopic crawler crane

The Max Bögl Group based in Sengenthal is convinced of the telescopic crawler crane concept. As a result of its good experience with Liebherr machines in the 100 and 220 tonne class, the Bavarian company has now purchased another LTR 1220. It particularly shows its strengths in the assembly of prefabricated concrete components. The crane’s short set-up time on site was another key point behind the decision. Find out more

Press releases | 08/02/2021

Liebherr in Ehingen switches to climate-neutral HVO fuel

From September 2021, Liebherr-Werk Ehingen GmbH will power its mobile and crawler cranes exclusively using pure HVO fuel. HVO fuels which comply with standard EN 15940 with a base of hydrated vegetable oils and other synthetic fuels produced using renewable energies can make a valuable contribution to reducing global emissions of greenhouse gases. All Liebherr engines up to the 560 KW power class are approved for operation with HVO. Find out more

Press releases | 07/27/2021

Bruns Kranvermietung based in Lüneburg takes delivery of its first Liebherr mobile crane

Bruns Kranvermietung GmbH based in Lüneburg has taken delivery of its first Liebherr mobile crane, an LTM 1070-4.2. The mobility, flexibility and technical innovations on the Liebherr 70 tonne crane persuaded the company to buy it. Simpler driving permits with a 10 tonne axle load and the VarioBase® variable supporting base were major criteria behind the northern German company ordering its first mobile crane from Liebherr. Find out more

Press releases | 07/15/2021

Premiere – prefabricated constructions specialist Pekabex invests in Liebherr mobile crane

“This is our company’s very first mobile crane. We have never had this type of machine before”, says Grzegorz Dużyński. He is Head of the Assembly Department at Polish prefabricated constructions specialist Pekabex. The group has had a Liebherr LTM 1160-5.2 available to it since the start of May 2021. Pekabex is one of the leading manufacturers of prefabricated constructions and concrete components in Poland. Find out more

Press releases | 07/13/2021

Two top class models – column loaded by Liebherr tandem hoist

A new Liebherr LTM 1650-8.1 met up with its predecessor, the LTM 1500-8.1 (over 600 of which were manufactured) recently to load an enormous column in the River Rhine port of Andernach. Together, the two 8-axle cranes placed the 43 metre steel cylinder on a barge. Find out more

Press releases | 07/12/2021

Transnacional adds used LTM 1500-8.1 to its crane fleet

Crane and passenger transport contractor Transnacional has taken delivery of a used Liebherr LTM 1500-8.1 mobile crane. The 8-axle 500 tonne crane was supplied by Liebherr-Ibérica, S.L from Spain to the company based in the north-east of Brazil. The versatility of the LTM 1500-8.1 and the company’s deep confidence in the Liebherr brand were the main criteria behind the decision. Find out more

Press releases | 07/07/2021

1,300 maritime cranes – from Rostock to the world

Since the start of production in 2005, Liebherr-MCCtec Rostock GmbH has manufactured and delivered over 1,000 maritime cranes. Today, the numerous mobile harbour, ship and offshore cranes are in use in over 100 countries on all continents. Now the 1,300th crane has left the Rostock premises to its destination in Ghana. Find out more

Press releases | 07/06/2021

“VarioBase® is the Ferrari of crane support systems”

Hildesheim-based K&W Autokrane GmbH & CO.KG has a fleet of eight mobile cranes. To date, an LTM 1030-2.1 and a compact LTC 1050-3.1 were its only machines bearing the Liebherr logo. Now the company has ordered three LTM mobile cranes from the Ehingen-based crane manufacturer. The reason behind the change of manufacturer – the extremely successful VarioBase® crane support system. Find out more

  • Results per page