SmartDevice: Your smart ­fridge from Liebherr

Currently, the following functions are possible with the SmartDeviceBox and SmartDevice app:

• Registration of your Liebherr appliances with your smartphone or tablet via the SmartDevice app
• Appliance management from anywhere, e.g. querying the appliance status and changing the temperature settings of your appliance
• Switching functions such as SuperCool and SuperFrost (depending on the functions of your appliance) on and off
• Notifications about relevant status and alarm messages directly to your smartphone, including reminder functions such as door alarm or BottleTimer (depending on the functions of your appliance)
• Networking with other services by partners such as voice assistants or Smart Home platforms

To use the functions of the SmartDeviceBox to their full extent, the following prerequisites should be met:

• A SmartDevice-compatible fridge
• An Android or IOS-compatible smartphone/tablet with internet access (mobile data access or WiFi).
• Please note that additional costs may be incurred depending on your Internet provider.

Further technical requirements for your home network and router are:

• IEEE 802.11b/g/n with 2.4GHz. However, if you use a router with a cycle rate of 5GHz (IEEE 802.11n/ac), please ensure that your router is set to “mixed operation”.
• The WiFi network key must not exceed 64 characters.
• IPv4
• WPA2 personal
• The ports cannot be configured; a connection to Port 8883 of the server service.home.myliebherr.com is established by default.
• Connection via guest access may lead to problems.

You can find instructions and videos on how to insert the SmartDeviceBox easily on this page.

• Reset the SmartDeviceBox WiFi (“see question: How do I reset the WiFi settings for the SmartDeviceBox?”)
• Carry out the connection process again as described in the app. You can find further information and a step-by-step guide here.

Please ensure the following:

• Your mobile device has the most up-to-date version of the app.
• The SmartDeviceBox WiFi was correctly reset.
• You entered your home network password correctly.
• Your router has a strong enough WiFi signal.

We have compiled a detailed guide on this page.

• Select your appliance under Settings in the app. Then select the function “Edit WiFi login data” and follow the instructions in the app.
• Otherwise, you can proceed as follows: Delete the appliance in the app and add it again. Carry out the SmartDeviceBox WiFi reset (see question: How do I reset the WiFi settings for the SmartDeviceBox?) and start the connection process as described in the app.

You can find an explanation of the various symbols on this page.

The SmartDeviceBox still contains valuable materials and must be disposed of separately from unsorted domestic waste. A discarded SmartDeviceBox must be correctly disposed of in accordance with local regulations and laws.