Deep foundation
Weitere Produktsegmente
Indonesia (en)

The combined piling and drilling rig LRH 200 has especially flexible leader kinematics that enable very high radii and inclinations of up to 18° in all directions. A flexible in-house hammer concept allows for the use of tamper weights with varying weights. Therefore, concrete, steel or timber piles can be optimally installed. The new LRH 200 offers a further range of applications: When configured as a drilling rig, a high-performance drilling drive provides the necessary torque for the common single pass methods such as continuous flight auger, full displacement and down-the-hole drilling pr...

    01/16
    Special radii and inclination
    The flexible leader kinematics allows very large radii of up to 8 m and inclinations of up to 18° in all directions. Thus, a complete pile group can be installed from one location without repositioning the carrier machine.
    13-metre vertical travel device
    The special leader kinematics allow the leader to be raised or lowered by 6.5 m above/below ground level.
    Easy transportation and quick set-up
    Basic machine and leader can be transported in one piece with all hydraulic hoses connected. The minimized assembly work allows for quick and easy transportation of the machine between jobsites.
    Safe access
    Side platform, railings and ladders are fully integrated in the new machine design and no longer need to be removed for transport.
    High operator comfort
    The innovative cabin design includes a modern air-conditioning system and an optimized view from the cabin, as well as an orthopaedic operator’s seat. All switches, joysticks and pedals are ergonomically positioned.
    Powerful drive technology
    The Liebherr-own and fuel efficient diesel engine generates the required power. In combination with the on-board hydraulics a sufficient amount of performance for various deep foundation works is provided. When using further attachments like casing oscillators, no additional power pack is needed.

    Technical data – LRH 200 piling rig

    PDF (1,5 MB)

    Technical data (USA) – LRH 200 piling rig

    PDF (1,5 MB)

    Overview LRH series piling rigs

    PDF (0,8 MB)

    Overview LRH series (USA) piling rigs

    PDF (0,8 MB)

    Solutions for deep foundation work

    PDF (8,7 MB)

    MyJobsite

    PDF (0,3 MB)
    MyJobsite
    One single tool for the collection, documentation and analysis of all process, machine, construction site and position data.
    Recording of working processes (PDE)
    With the PDE process data recording system machine data is recorded during the working process.
    LIPOS positioning system
    Accurate positioning and precise execution of piling or drilling processes.
    Ground Pressure Visualization
    The Ground Pressure Visualization calculates the current ground pressure of the machine in real time and compares it with the specified safety limits of the relevant jobsite.
    Remote control
    The remote control simplifies the loading process for transportation as well as the assembly of the machine.
    Eco silent mode
    With the eco silent mode the engine speed can be reduced to a predefined, required level. With this feature a notable reduction in diesel consumption can be achieved without any impact on operational output. Noise emissions are thus also lowered.
    Continuous flight auger drilling
    The loosened soil material is continuously conveyed to the surface using a continuous auger, the so-called continuous flight auger.
    Impact driving
    Impact driving uses a hydraulic hammer for the installation of various types of pile. The hammer’s ram mass impacts on the pile.
    Full displacement drilling
    Full displacement drilling is a modification of continuous flight auger drilling. The drilling tool used is a smooth pipe with an auger-type starter piece.
    Wet soil mixing
    For wet mixing a self-hardening suspension is introduced into the ground.
    Down-the-hole drilling
    For down-the-hole drilling a hammer is mounted on the lower end of a drill rod. The hammer is activated by adding compressed air.
    SOB Endlosschnecken
    SOB Schneckenanfänger
    SOB Zubehör
    VdW Zubehör

    • LRH 200 - When pile driving is not enough.

    • Battery powered piling rigs LRH 100.1 and LRH 200 unplugged - Interview Product Management

    • MyJobsite – Your work at a glance

    • Drilling assistant