Product segments

Please enter your search text

Search text

English
English
LiebherrDeep foundation
MachinesAttachmentsMethodsServicesTechnologyNewsOther product segmentsCzech republic (en)
Deep FoundationMachinesFixed and swinging leadersLRH 200

The combined piling and drilling rig LRH 200 has especially flexible leader kinematics that enable very high radii and inclinations of up to 18° in all directions. A flexible in-house hammer concept allows for the use of tamper weights with varying weights. Therefore, concrete, steel or timber piles can be optimally installed. The new LRH 200 offers a further range of applications: When configured as a drilling rig, a high-performance drilling drive provides the necessary torque for the common single pass methods such as continuous flight auger, full displacement and down-the-hole drilling pr...

metricimperial

  • Max. pile length - 24.5 m

  • Max. pile weight - 16 t

  • Leader inclination - 1:3

  • Vertical travel device - 6,5 m

  • Basic hammer weight max. - 18,000 kg

product image 0
Special radii and inclination
The flexible leader kinematics allows very large radii of up to 8 m and inclinations of up to 18° in all directions. Thus, a complete pile group can be installed from one location without repositioning the carrier machine.
13-metre vertical travel device
The special leader kinematics allow the leader to be raised or lowered by 6.5 m above/below ground level.
Easy transportation and quick set-up
Basic machine and leader can be transported in one piece with all hydraulic hoses connected. The minimized assembly work allows for quick and easy transportation of the machine between jobsites.
Safe access
Side platform, railings and ladders are fully integrated in the new machine design and no longer need to be removed for transport.
High operator comfort
The innovative cabin design includes a modern air-conditioning system and an optimized view from the cabin, as well as an orthopaedic operator’s seat. All switches, joysticks and pedals are ergonomically positioned.
Powerful drive technology
The Liebherr-own and fuel efficient diesel engine generates the required power. In combination with the on-board hydraulics a sufficient amount of performance for various deep foundation works is provided. When using further attachments like casing oscillators, no additional power pack is needed.
Operating weight
81.0 t
Max. winch line pull
200 kN
Max. crowd force
200 kN
Drive
Conventional (diesel engine)
Engine power
250 kW
Leader inclination
1:3
Max. height
29.2 m
Max. leader lenght
25.7 m
Vertical travel device
6,5 m
Max. pile length
24.5 m
Max. pile weight
16 t
Max. torque
250 kNm
Jib length
7.8 m
Basic hammer weight min.
6,740 kg
Basic hammer weight max.
18,000 kg
Ram mass min.
3,000 kg
Ram mass max.
10,000 kg
Predrilling, max. drilling depth
17.4 m
Predrilling, max. torque
35 kNm
Continuous flight auger drilling, max. drilling depth
34.5 m
Continuous flight auger drilling, max. drilling diameter
1,000 mm
Full displacement drilling, max. drilling diameter
500 mm
Full displacement drilling, max. drilling depth
35.2 m
Soil mixing, max. mixing diameter
1,500 mm
Soil mixing, max. effective length
34.3 m
Down-the-hole drilling, max. drilling depth
25.2 m
Min. transport width
3,490 mm
Min. transport height
3,400 mm
MyJobsite
One single tool for the collection, documentation and analysis of all process, machine, construction site and position data.
Recording of working processes (PDE)
With the PDE process data recording system machine data is recorded during the working process.
LIPOS positioning system
Accurate positioning and precise execution of piling or drilling processes.
Ground Pressure Visualization
The Ground Pressure Visualization calculates the current ground pressure of the machine in real time and compares it with the specified safety limits of the relevant jobsite.
Remote control
The remote control simplifies the loading process for transportation as well as the assembly of the machine.
Eco silent mode
With the eco silent mode the engine speed can be reduced to a predefined, required level. With this feature a notable reduction in diesel consumption can be achieved without any impact on operational output. Noise emissions are thus also lowered.
Continuous flight auger drilling
The loosened soil material is continuously conveyed to the surface using a continuous auger, the so-called continuous flight auger.
Impact driving
Impact driving uses a hydraulic hammer for the installation of various types of pile. The hammer’s ram mass impacts on the pile.
Full displacement drilling
Full displacement drilling is a modification of continuous flight auger drilling. The drilling tool used is a smooth pipe with an auger-type starter piece.
Wet soil mixing
For wet mixing a self-hardening suspension is introduced into the ground.
Down-the-hole drilling
For down-the-hole drilling a hammer is mounted on the lower end of a drill rod. The hammer is activated by adding compressed air.
SOB Endlosschnecken
SOB Schneckenanfänger
SOB Zubehör
VdW Zubehör

  • LRH 200 - When pile driving is not enough.

  • Battery powered piling rigs LRH 100.1 and LRH 200 unplugged - Interview Product Management

  • MyJobsite – Your work at a glance

  • Drilling assistant

  • Torque - 35 kNm

  • Speed - 20 U/min

  • Torque - 0 - 180 kNm

  • Speed - 0 - 80 U/min

  • Torque - 252 kNm

  • Speed - 58 U/min

  • Max. ram weight - 3,000 kg

  • Max. energy - 36 kNm

  • Blow rate - 50 - 150 bpm

  • Max. ram weight - 4,000 kg

  • Max. energy - 48 kNm

  • Blow rate - 50 - 150 bpm

  • Max. ram weight - 5,000 kg

  • Max. energy - 60 kNm

  • Blow rate - 50 - 150 bpm

  • Operating weight - 73.6 - 84.6 t

  • Max. torque - 297 kNm

  • Kelly drilling, max. drilling depth - 70.8 m

  • Kelly drilling, max. drilling diameter - 3,400 mm

Sales and Service

Our customers can rely on a worldwide sales and service network. Search here for the right contact partner.

Used machines

Do you prefer a used machine? Find construction machines persuasive by experience.

Concrete pumps

Stationary concrete pumps in conjunction with concrete distribution systems are particularly economic for use over several days.

Attachments

With the attachment devices developed and manufactured in-house, we consolidate our position as a full-service provider in the deep foundation industry.

Foundation methods

Deep foundation machines from Liebherr can be applied for all common drilling methods, for slurry wall installation and soil improvement.

Customer service

Our Customer Service aims to effectively help in maintaining Liebherr equipment at its best.

Application technology

Our application specialists assist with the correct choice of application and the most suitable machine configuration.

Digital solutions

We offer a number of IT solutions, which provide substantial support for all those involved in the construction site.