News et communiqués de presse

Pazoła boosts its crane fleet: Liebherr LTM 1300-6.3 expands service portfolio

With a Liebherr LTM 1300-6.3, the Polish crane services provider Pazoła is expanding its fleet as well as its portfolio of services. The LTM 1300-6.3’s outstanding technical characteristics, especially the 90-metre-long telescopic boom, coupled with the many years of partnership with Liebherr, played a key role in the decision to choose the 6-axle crane.

New pre-used crane for Universal Cranes: LTR 11200 modernises level crossing

With the LTR 11200, Universal Cranes is adding a completely overhauled pre-used crane to its fleet. One of the telescopic crawler crane’s first jobs for the Australian crane hire company was during the modernisation of a railway crossing in Brisbane, where it successfully installed bridge girders and thus mastered the challenges of a complex infrastructure project.

Bridge demolition: Swiss giant creates “clear conditions” in Hanau

At some point, it had to happen. After many years of preparation, the experts at the construction company Max Wild in Berkheim bei Memmingen, the crane hire company Emil Egger in St. Gallen, the building authority of the City of Hanau, Deutsche Bahn and other stakeholders completed the concept for the demolition of the Eisenstrassenbrücke, which had been built in 1959 at the western end of the main railway station in Hanau. In the week before Christmas, work commenced and the first section of the bridge was demolished.

Flexible and economical: Krösche takes delivery of three further Liebherr LTF 1045-4.1 truck-mounted cranes

Krösche-Kran Service GmbH, a specialist provider of assembly services for prefabricated houses, has taken delivery of three new LTF 1045-3.1 truck-mounted telescopic cranes. The company, based in Holzminden, Lower Saxony, exclusively uses telescopic cranes mounted on a standard truck chassis for its work throughout Germany.

LTM 1500-8.1 for WWN Guindastes: focus on versatility and performance

The Brazilian company WWN Guindastes has purchased a used LTM 1500-8.1 from Liebherr. It is the second crane of this model in WWN Guindastes’ fleet and will be used on work that calls for a long reach and high load capacities. For the crane company, the variety of potential uses, the 500-tonner’s high load capacity but also Liebherr’s excellent reputation in relation to used cranes were the deciding factors. When it comes to the purchase of new cranes too, WWN chooses Liebherr: an LTM 1300-6.3 is currently awaiting shipment at the Liebherr plant in Ehingen.

Dossier de presse : Bauma 2025

Vous trouverez tous les communiqués de presse publiés par Liebherr.

Électrisante : LR 1300.2 SX unplugged

La grue sur chenilles LR 1300 fête cette année son 18e anniversaire. Au salon Bauma, Liebherr présente pour la première fois le modèle de 300 tonnes en version unplugged avec les avantages du « zéro émission ».

LTM 1650-8.1: Not tired in Müden

The Moselle, with a length of 544 km the second longest tributary of the Rhine, plays a decisive role as an international waterway. 28 barrages enable inland waterway vessels to make smooth progress. However, the failure of a lock, as in December 2024, represents a significant disruption to inland traffic. In order to act quickly and efficiently in this critical situation, the Mosel-Saar-Lahn Waterways and Shipping Authority (WSA) has had a framework agreement with the Trier-based crane rental expert Steil for years. Thanks to this cooperation and state-of-the-art Liebherr technology, the damaged gate could be salvaged and a new one installed. In the meantime, a Liebherr mobile crane played the main role in the emergency lock-out of 74 ships stuck on the Moselle.

Reliability that impresses: Bluway launches new Liebherr 3-axle crane for Casais in Angola

36 years of reliability that impresses: a Liebherr LTM 1050 all-terrain crane from 1988 provides loyal service to the Angolan company Casais. The mobile crane is in continuous use and is a perfect example of the longevity and high value retention of a Liebherr mobile crane. The ageing 50-tonner is now being supported by a brand new Liebherr LTM 1050-3.1. Thanks to the positive experience with the technology and quality supplied, Casais once again opted for a Liebherr mobile crane.

Power house on two axles: Milplan invests in an LRT 1130-2.1 from Liebherr

Milplan, a company based in Belo Horizonte (Brazil) is boosting its crane fleet with a new LRT 1130-2.1 rough-terrain crane from Liebherr. The 130-tonner will in future be used in particular in the mining sector. Versatile deployment options, high load capacities and safety were the key factors when it came to procuring the new crane.

New LTM 1450-8.1 in operation: Krandienst Schulz focusses on efficiency and flexibility

Krandienst Schulz, a company previously based in the Hanseatic City of Hamburg, has relocated to just outside the city and the North-Eastern municipality of Braak (Schleswig-Holstein). The new, spacious company premises also feature a high-spec workshop, where the firm’s 30 Liebherr cranes are maintained and repaired. Also on site is a LTM 1450-8.1, which is just a few months old yet, with its impressive performance characteristics and the 85-metre on-board boom, is able to quickly handle the assembly of tower crane up to 80 metres tall thanks to short setup times.

Henneberger Schwerlast adds Liebherr LTM 1300-6.3 mobile crane to its fleet

It is now the company’s most powerful mobile crane: Henneberger Schwerlast e.K., a crane and logistics contractor, has taken delivery of a Liebherr LTM 1300-6.3. The versatility of the 300-tonne crane and the exceptionally long telescopic boom of 90 metres were decisive factors in the choice of the company from Themar in southern Thuringia. The new crane was already able to demonstrate its impressive performance during its first job in Eisenach.

Guindastes Tatuapé expands fleet: First LTM 1110-5.2 with LICCON3 in Brazil

The Brazilian crane and heavy transport company Guindastes Tatuapé has expanded its crane fleet with a new LTM 1110-5.2. The 110-tonne model is therefore the first crane type from Liebherr to be shipped to Brazil with the new LICCON3 control system. Innovative technology, performance and many years of partnership played a key role in the purchase.

T3 Projects – trio of Liebherr cranes goes to South Africa

Due to the increasing size and complexity of its recent construction projects, South African company T3 Projects decided to purchase three new mobile cranes from Liebherr. The LRT 1100-2.1 and LRT 1130-2.1 rough terrain cranes are ideal for hoisting work in inaccessible, remote areas. The LTM 1300-6.3 mobile crane supplements the performance of the T3 Projects fleet with its maximum lifting capacity of 300 tonnes.

« Hands on the future » : Liebherr présentera à la Bauma 2025 des solutions pour le chantier de demain

« Hands on the future » : sur une surface d’environ 14 000 m2, Liebherr exposera à la Bauma 2025 plus de 70 produits d’avenir issus des segments de produits terrassement, manutention de matériaux, secteur minier, grues mobiles sur pneus et sur chenilles, grues à tour, fondations spéciales, technique du béton et composants. Toujours sous le même slogan, le Groupe montrera la manière dont il aborde dès maintenant les défis du futur et élabore des solutions main dans la main avec ses clients, en tant que partenaire fiable. Des pavillons thématiques et un InnovationLab inviteront en outre le public à s’immerger dans l’univers des technologies et de l’innovation d’aujourd’hui et de demain.

C’est une question de contrôle : la grue mobile Liebherr de 120 tonnes avec la nouvelle commande LICCON3

Liebherr présente deux types de grues supplémentaires équipées de la nouvelle commande LICCON3 : la LTM 1120-4.1 devient la LTM 1120-4.2. Ainsi, l’engin de 120 tonnes à 4 essieux se distingue également par son design futuriste. De plus, la LTM 1120-4.2 bénéficie de l’embrayage de démarrage refroidi par huile TraXon DynamicPerform et de nouveaux systèmes d’assistance à la conduite pour améliorer la sécurité sur la route. Liebherr expose la LTM 1120-4.2 à la Bauma de Munich.

Canadian crane service provider expands its fleet – new LTM 1160-5.2 for DeSantis

DeSantis Crane Service Inc. is adding a Liebherr LTM 1160-5.2 mobile crane to its fleet. The Canadian crane service provider will use the 180-tonne crane primarily for lifting prefabricated concrete parts and air conditioning systems. The scope of delivery includes lattice extensions that enable the crane to reach a maximum lifting height of 92 metres.

Crane becomes a Christmas locomotive

Technology meets Christmas magic: The employees of our customer Cutting Edge Consulting Inc. (CEC) delighted visitors at the 2024 Santa Claus Parade in Kamloops, Canada, with a unique combination of festive spirit and technical sophistication.