Liebherr segment clamping arbor SECLA
The clamping fixture for optimum quality and very fast delivery times
Clamping systems for gear manufacturing are usually very individual and have special requirements regarding concentricity and interfering contours. For this reason, it is particularly important to find the right clamping device for the application.
Liebherr’s segment clamping arbor SECLA is an innovative, inexpensive standard solution which will be delivered to you within just ten weeks. The clamping technology reduces expensive downtimes and is suitable for all Liebherr technologies (gear hobbing, shaping, skiving, grinding).
Video: The operating principle of our segment clamping arbor explained
Standard segment clamping arbor
Size 1-4
Optional
- Collision and working area investigation*
- Adapter for Liebherr standard machine table interface
- Suitable grease
* may extend the delivery time
- Suitable tools
- Load handling attachment for ergonomic handling
- Test workpiece and measurement report
Size | 1 | 2 | 3 | 4 | |
Clamping range | mm | Ø 20 - Ø 32 | Ø 25 - Ø 41 | Ø 32 - Ø 51 | Ø 41 - Ø 62 |
Radial runout | mm | < 0.008 | < 0.008 | < 0.008 | < 0.008 |
Max. actuating force | kN | 8 | 10 | 12 | 25 |
Clamping margin* | mm | 1.5 | 1.5 | 1.5 | 2 |
Release stroke* | mm | 2 | 2 | 2 | 2.5 |
Max. stroke of the clamping bushing | Ø mm | +0.2 / -0.3 | +0.3 / -0.4 | +0.3 / -0.4 | +0.4 / -0.5 |
Permitted clamping range** | Ø mm | ± 0.05 | ± 0.1 | ± 0.1 | ± 0.2 |
A | mm | 80 | 77 | 60 | 60 |
B | mm | 20 | 20 | 20 | 20 |
C* | mm | 135 | 135 | 135 | 136 |
D | mm | 140 | 140 | 140 | 140 |
E* | mm | 170 | 177 | 190.5 | 198.5 |
F | mm | 5.5 | 5.5 | 5.5 | 5.5 |
Ø G | mm | 5 | 5 | 5 | 5 |
Ø H | mm | 85 | 85 | 85 | 85 |
Ø I | mm | 60.5 | 69.5 | 88 | 89 |
Ø J | mm | 32.5 f7 | 41.5 f7 | 60 f7 | 63 f7 |
Ø K | mm | 89 f7 | 89 f7 | 89 f7 | 89 f7 |
Ø L | mm | 122 -0.05 / -0.2 | 122 -0.05 / -0.2 | 122 -0.05 / -0.2 | 122 -0.05 / -0.2 |
Ø M | mm | 9 | 9 | 9 | 9 |
N | mm | M 6 | M 6 | M 6 | M 6 |
O | mm | M 6 | M 6 | M 6 | M 6 |
*for clamping units; mean value of clamping range in “clamped position” | **for clamping unit with nominal bore dimension with tolerance <= IT8 |
Application examples for the clamping system in gear technology
Your contact for the perfect clamping technology solution
We are happy to answer any questions about our clamping fixture.
Service for segment clamping arbor
Liebherr-Verzahntechnik GmbH
Kaufbeurer Straße 141
87437 Kempten
Germany