Deep foundation

Four-start pilot bit square plug 100 x 100 mm with 4 round shank chisels RSC40 equipped.

Type
Pilot bit
Equipment
4 x round shank chisels RSC40
ShopP285-RSC4
Article no.11239418
Shop
  • No. of cutters - progressive

  • Pilot - Round shank chisel

  • Casing - cased

  • Range of application - Medium-hard to hard rock up to 100 MPa

  • Equipment - Kelly box 200 x 200 mm, round shank chisels densely mounted on the progressive auger part, round shank chisel pilot bit, easily exchangeable hard metal wear plates and hardfacing as wear protection

  • No. of cutters - progressive

  • Pilot - Round shank chisel

  • Casing - uncased

  • Range of application - Medium-hard to hard rock up to 100 MPa

  • Equipment - Kelly box 200 x 200 mm, round shank chisels densely mounted on the progressive auger part, round shank chisel pilot bit, easily exchangeable hard metal wear plates and hardfacing as wear protection

  • No. of cutters - progressive

  • Pilot - Round shank chisel

  • Casing - uncased

  • Range of application - Medium-hard to hard rock up to 100 MPa

  • Equipment - Kelly box 200 x 200 mm, round shank chisels densely mounted on the progressive auger part, round shank chisel pilot bit, easily exchangeable hard metal wear plates and hardfacing as wear protection

  • No. of cutters - progressive

  • Pilot - Round shank chisel

  • Casing - cased

  • Range of application - Medium-hard to hard rock up to 100 MPa

  • Equipment - Kelly box 200 x 200 mm, round shank chisels densely mounted on the progressive auger part, round shank chisel pilot bit, easily exchangeable hard metal wear plates and hardfacing as wear protection

  • No. of cutters - single-start

  • Pilot - Round shank chisel

  • Casing - cased

  • Range of application - Very densely consolidated non-cohesive soils and low strength rock up to approx. 50 Mpa. and platy rock.

  • Equipment - Kelly box 200 x 200 mm, cutter bar with round shank chisels and calibration chisels, round shank chisel pilot bit, easily exchangeable hard metal wear plates and hardfacing as wear protection

  • No. of cutters - single-start

  • Pilot - Round shank chisel

  • Casing - uncased

  • Range of application - Very densely consolidated non-cohesive soils and low strength rock up to approx. 50 Mpa. and platy rock.

  • Equipment - Kelly box 200 x 200 mm, cutter bar with round shank chisels and calibration chisels, round shank chisel pilot bit, easily exchangeable hard metal wear plates and hardfacing as wear protection