Deep foundation
Weitere Produktsegmente
Mozambique (en)

The hydraulic slurry wall grab is modularly designed and has an extremely robust base body. As the names of the grabs imply, HSG 5-18, slurry walls with thicknesses between 500 and 1800 mm can be installed, depending on the composition. The base body of the “L” (large) version is 2.5 m longer. The resulting total height of the grab at 9.5 m, as well as the high weight with low centre of gravity provide for even better vertical positioning and are especially advantageous when installing larger dimensioned slurry walls. When working in difficult ground conditions, the dead weight of the grab can...

    01/08
    Flexible
    The modular design of the grab promises a high level of flexibility and enables the optimum adaptation to jobsite requirements.
    Robust
    The grab convinces with its robust design and high closing force. These properties provide a decisive advantage especially in hard soils.
    Basic machine and grab perfectly matched
    Thanks to the synchronisation of the hoisting winches high grab weights are viable and the lifting capacity of the duty cycle crawler crane is optimally utilized.
    Chiselling
    The robust design of the grab and the synchronized free-fall winches allow for light chiselling as accustomed with mechanical grabs.
    Hydraulic rotating device
    Alignment of the grab in all directions as well as quick and operator-friendly 180° rotation after each grab cycle thanks to a hydraulic rotating device. The assistance of an employee on the ground is no longer required.
    Easy maintenance
    Opening and closing of the grab jaws is synchronised via push rods. This mechanism is reliable and easy to maintain. The piston rods of the hydraulic cylinders are protected inside the grab body.

    Hydraulic slurry wall grab HSG 5-18

    PDF (7.7 MB)

    Garra hidráulica para parede diafragma HSG 5-18

    PDF (5.1 MB)

    Hydraulic slurry wall grab HSG 5-18 (USA)

    PDF (7.7 MB)

    Job report HS 8100 HD with slurry wall grab HSG 5-18 L in Milan

    PDF (0.7 MB)
    Semi-Kelly guide
    The optional semi-Kelly guide on the boom head of the duty cycle crawler crane provides for steady guidance of the grab outside the trench. This makes rotation and alignment of the grab easier for the operator and accelerates the process.
    Grab extension
    The grab extension increases weight and length of the grab and therefore enhances the verticality of the trench. It is recommended for depths exceeding 40 m.
    Lower guide bar extensions
    Additionally available guide bar extensions allow for the grab to be aligned in the trench more quickly. These extensions are mounted on the existing guide bars.
    Additional weight
    Additional weights are available in various sizes up to 7 t. These are used when working in hard soils.
    Adjustable guide bars
    During excavation work the grab direction can be corrected using the guide bars and so higher verticality of the slurry wall is achieved. The system is driven hydraulically and remote-controlled from the cabin. The grab must be equipped with a hydraulic rotating device.
    Verticality Assistant
    This system monitors the slurry wall installation process by measuring the deviations between the slurry wall and the grab. Additionally the productivity data is recorded.
    Slurry wall installation with grab
    A clamshell grab excavates the slurry wall panels.

    • Verticality Assistant

    • Slurry wall grab HSG 5-18 C/L