您目前所处位置
利勃海尔集团的产品和服务为您的下一个起重机作业选择正确的臂架系统
我们的LR履带式起重机具有高度可变的臂架系统,适用于多种应用。根据您的要求,起重作业的最佳组合可以从我们的模块化吊杆套件中进行组装。
我们所有的臂架系统都是在内部开发的,在投放市场之前,都在自己的测试现场进行了彻底的测试。
我们每天都在不断开发我们的臂架系统组合,因此我们可以向您保证,对于您将来可能进行的任何起重作业,我们都会为您提供完美的臂架配置。
从下面的各种臂架系统中发现一些臂架配置,请随时与我们联系以获取更多信息。
并联臂架系统是利勃海尔的一项开创性发展。简单的机械附加系统可将大型履带式起重机的承载能力提高50%以上。
这项屡获殊荣的技术还提供了卓越的性价比。
桁架部分平行安装在臂架系统桁架臂的底部。这不仅大大提高了负载方向的稳定性,而且也提高了侧面的稳定性。特别是臂架系统的负载能力可以通过臂架显著增加。
使用变幅起重臂操作也可以实现大量的负载能力增加,因为动力臂增加了扭矩。这大大扩展了起重机的使用范围。
平行臂架系统目前可用于LR 11000、LR 11350和LR 13000起重机。
负载能力的增加在紧凑型LR 11000起重机上被证明是非常有效的。在这种情况下,变幅起重臂的部件用于臂架。这使得主臂的部分可用于特别强大的变幅起重臂。
名为SX的臂架系统是为我们的750吨桁架臂起重机LR 1750/2和LG 1750开发的,用于安装最新一代的风力涡轮机。使用SX系统可以安装轮毂高达165米、部件重量高达127吨的涡轮机。
以前,这些能力数据是1000吨级或以上起重机的专有领域。
新的SX系统与以前的桁架臂系统的不同之处在于臂的底部区域使用3.5米宽的桁架截面,而非仅3米宽的部分。延长的桁架部分增加了主臂的横向稳定性,因此提供了更高的承载能力。
此外,桁架截面的重量也减小了。
通过对SX系统进行特别创新的扩展,进一步提高了起重能力:代替3.5米宽的格架部分,而是每个长度14米的两个格架部分(SX2系统)或每个长14米的三个格架部分(SX3系统)宽度为6米的)安装在主吊臂的最低区域。
这为臂架系统提供了额外的刚度,从而提高了其承载能力。
为了在臂架中安装6米宽的桁架节段,在转台的枢轴节段上有一个从3米到6米的延伸适配器。在顶部,第二个适配器将6米的宽度减小到3.5米。
在设计这个系统扩展时,我们的重点是确保它非常经济。这意味着起重机操作员除了购买SX系统外,仅需购买6米宽的型材和适配器。
兼容的臂架系统可用于所有产品类型。这为起重机提供了更大的灵活性,简化了物流并减少了库存。
所谓的WV重型副臂是使用变幅副臂的组件组装而成的。它具有巨大的负载能力,可在需要真实载重的情况下使用。
我们的履带起重机臂架系统已经在日常使用中应用了几十年我们开发的重点始终是操作人员和起重机操作的安全。
因此,我们还设计了一系列安全设备,例如通道梯或安全线引导系统,确保安全性