![Technical Data LRT 1100-2.1 [m/t]](/external/products/products-assets/c337edb2-9c19-4b57-b727-ca84a1f0191f-7_Thumbnail/IMG_110x156/Technical%20Data%20-%20metric.jpg)
You are here
Liebherr Group: Products & Services for PeruDuring the design of the LRT 1100-2.1 rough-terrain crane, our engineers focused on one specific criterion – safety. For both the crane operator and surrounding area. For example, the rough-terrain crane has outrigger monitors as standard. The support status is detected automatically and saved to the crane controller. The standard VarioBase® variable support base also enhances safety. It enhances flexibility on site and also increases the crane’s lifting capacity. The LRT 1100-2.1 has a telescopic boom with Liebherr’s time-tested telematic telescoping system for rough-terrain cranes, on which the various telescoping sections can be extended independently with a single cylinder and then pinned to the telescopic section above. This system is particularly simple and user-friendly, as excellent lifting capacities over the entire radius range can be achieved with just two telescoping modes, power or length.
The standard width crane cabin can be tilted backwards to provide a better viewing angle of the load.
VarioBase® support technology delivers higher lifting capacities and also ensures maximum operational safety.
The crane monitors the outriggers, the ballast installation and the installation of the optional double folding jib with angle adjustment.
Simple telescoping with telematics and two fixed telescoping paths.
Global uniform safety standard which complies with all current regulations – ASME B30.5, EN 13000, Australian Standards (AS) and GOST standard.
Max. load capacity | 100 t |
---|---|
at radius | 2.50 m |
Telescopic boom from | 12.60 m |
Telescopic boom up to | 50.00 m |
Lattice jib from | 2.00 m |
Lattice jib up to | 19.00 m |
Drive engine/make | Cummins |
Drive engine | 6-Zylinder-Diesel |
Drive engine/power | 188 kW |
Number of axles | 2 |
Drive/Steering standard | 4 x 4 x 4 |
Driving speed | 25.00 km/h |
Total ballast | 15.00 t |
ECOmode minimises both fuel consumption and noise emissions when operating the crane superstructure. The crane operator sets the required working speed using the control lever. The crane control system calculates the perfect engine speed for the diesel engine.
VarioBase makes the crane’s support system variable. It enables each outrigger to be extended to a different length. This enhances safety – particularly in constricted spaces. And what's more, the crane’s lifting capacities are significantly increased, particularly over the outriggers and depending on the configuration.
Worldwide safety standard: Global uniform safety standard which complies with all current regulations – ASME B30.5, EN 13000, Astralian Standards (AS) and GOST standard.
Up to 90 % lower CO2 emissions in action.
Our customer portal MyLiebherr is your entrance to the Liebherr service world. It gives you access to extensive basic and additional services for your mobile and crawler cranes