News & press releases

Filter reports

Period

Subject

Hits 671-680 of 728

Press releases | 05/29/2015

LTM 1300-6.2 mobile crane with Liebherr single-engine concept proves itself in use

Liebherr unveiled the new 300-tonne LTM 1300-6.2 at the Bauma 2013, featuring a brand new power concept to operate the superstructure. Instead of the twin-engine concept normally used on cranes in this class this crane is powered by a single engine with a mechanical shaft. Gear shafts are routed from the distributor gear in the substructure via two mitre gears through the centre of the slewing ring to the pump distributor gear in the superstructure. Several dozen models of this new crane have since proven their worth on sites around the world. Find out more

Press releases | 05/28/2015

Liebherr LTF 1060-4.1 truck-chassis crane provides maximum load capacity of 60 tons

At the 2015 Maskin Expo, Liebherr displays the LTF 1060-4.1 truck-chassis crane with a maximum load capacity of 60 metric tons. This crane was first launched in 2009 as an addition to the top end of the cranes intended for installation on truck chassis. With a 40-metre telescopic boom and a 16 m double folding fly jib, this crane can lift loads to a height of up to 56 m and an outreach of 48 m. Find out more

Press releases | 05/21/2015

Elcon Crane Hire adds Liebherr LTM 1400-7.1 mobile crane to its fleet

South African crane contractor Elcon Crane Hire recently took delivery of a Liebherr LTM 1400-7.1 mobile crane. The 400-tonne model on a 7-axle chassis is a major expansion upwards for the crane fleet. Previously an LTM 1250-6.1 with a load capacity of 250 tonnes was the company's most powerful crane. Find out more

Press releases | 05/13/2015

Tense night job for Gertzen – Liebherr mobile cranes fit out luxury liner at Papenburger Meyer shipyard

At the end of February in North Germany the "Anthem of the Seas", the largest cruise ship ever built in Germany was moved out of the massive Hall 2 dock at Papenburger Meyer shipyard. It was only possible to install the funnel casing and "North Star" viewing gondola outdoors due to the sheer size of the vessel. The order for this work was awarded to Gertzen, based in nearby Kluse, which completed the job smoothly using two 750-tonne mobile cranes. Gertzen used the Liebherr LTM 1750-9.1 from its own fleet and an LTM 1750-9.1 hired from Thömen. Find out more

Press releases | 05/06/2015

Liebherr to present the 3-Axle Mobile Crane LTM 1060-3.1 at Vei og Anlegg 2015

Liebherr presents the LTM 1060-3.1 mobile crane at the Vei og Anlegg 2015 trade fair in Oslo, Norway. The 60-tonne machine has a 48 m long telescopic boom and offers enormous load capacities. Liebherr introduced the LTM 1060-3.1 at the 2013 Bauma in Munich, Germany. Find out more

Press releases | 05/04/2015

BMS Heavy Cranes A/S strengthens fleet with Liebherr LR 11350 crawler crane

Danish company BMS Heavy Cranes A/S added a heavy duty LR 11350 crawler crane to its fleet in April. The Liebherr crane with a maximum load capacity of 1,350 tonnes constitutes a major upwards extension to the family run company's fleet. The new LR 11350 is the largest crane in Scandinavia. In addition to the assembly of large wind turbines, it will be used for a range of projects throughout Europe. Find out more

Press releases | 04/30/2015

Dornseiff adds Liebherr LTM 1500-8.1 and LR 1250 mobile and crawler cranes to its fleet

Two new Liebherr cranes have been added to the fleet operated by Dornseiff Autokrane und Schwertransporte GmbH & Co. KG based in Burbach in the German State of North Rhine-Westphalia. An LTM 1500-8.1 mobile crane and an LR 1250 crawler crane will strengthen the family-run company's crane fleet. The LTM 1500-8.1 with a maximum load capacity of 500 tonnes is the new flagship in the fleet. Find out more

Press releases | 04/20/2015

Liebherr telescopic handler TL 436-7 at the Intermat 2015: new model with 7 m lifting height

At the Intermat 2015, Liebherr showcases the TL 436-7, a representative of the new telescopic handler model range with 7 m lifting height. Three models with 7 m lifting height are available. During development, demands from companies in the construction industry and equipment hire were at the forefront. Find out more

Press releases | 04/20/2015

Liebherr Concrete Mixing Plant Betomix 2.5 A-R in Modular Design at the Intermat 2015

From the range of concrete mixing plants, Liebherr presents the Betomix 2.5 A-R at the Intermat 2015 in Paris. Equipped with the new ring-pan mixer RIM 2.5-M featuring a mechanical agitator system, this plant guarantees outstanding mixing results for even the most exacting of concrete types. Find out more

Press releases | 04/20/2015

Liebherr unveils new LTC 1050-3.1 compact mobile crane at the Intermat 2015

Liebherr unveils its new LTC 1050-3.1 compact mobile crane, the successor to the LTC 1045-3.1, at the Intermat 2015 in Paris. The partial use of an even stronger fine-grain structural steel and improvements in the boom telescopes mean that the load capacity has been increased yet again whilst the dimensions have stayed almost identical. The Liebherr innovations VarioBase® and ECOmode mean that crane operators can use the new LTC 1050-3.1 with even more safety and efficiency. The 6-cylinder diesel engine meets the latest emissions regulations for Stage IV / Tier 4f. Find out more

  • Results per page