![Technical Data - Mobile crane LTM 1150-5.3 [m/t]](/external/products/products-assets/fca62a53-f6b3-4153-865f-b2dc70e1ebba-7_Thumbnail/IMG_110x156/liebherr-286-ltm-1150-5.3-td-286-04-defisr09-2023.jpg)
You are here
Liebherr Group: Products & Services for Bulgaria
Other websites for Bulgaria
With a maximum lifting capacity of 150 tonnes (175 USt) and a long telescopic boom, the LTM 1150-5.3 is the perfect addition to Liebherr’s crane range below the LTM 1160-5.2. With an axle load of twelve tonnes (26,450 lb), the crane can carry nine tonnes (19,800 lb) of ballast on public roads. This ballast enables it to complete lots of jobs without requiring an additional vehicle to transport the ballast. Its powerful telescopic boom can be extended with lots of add-on jibs. These are compatible with many of our cranes with lifting capacities between 100 and 180 tonnes (220,500 lb and 396,830 lb). We have continued our single-engine strategy on this crane with a mechanical drive unit for the superstructure. The weight reduction created by the elimination of the superstructure engine is used to deliver a longer boom and more lifting capacity.
The crane can carry 9 t / 19,800 lb of ballast with an axle load of 12 t / 26,450 lb.
Carrying a large part of its ballast means there is often no need for an additional transport vehicle.
Many jobs can be completed quickly without any additional equipment thanks to its long boom and the ballast it carries.
Hill Start Aid helps starting on a gradient – consigning rolling backwards to history.
ECOmode and ECOdrive reduce fuel consumption by up to 10%.
Weighted plates on both sides of the hook block enable the weight of the block to be adjusted perfectly to the situation.
Max. load capacity | 150 t |
---|---|
at radius | 3.00 m |
Telescopic boom from | 12.30 m |
Telescopic boom up to | 66.00 m |
Lattice jib from | 2.90 m |
Lattice jib up to | 26.00 m |
Drive engine/make | Liebherr |
Drive engine | 6-Zylinder-Diesel |
Drive engine/power | 400 kW |
Number of axles | 5 |
Drive/Steering standard | 10 x 6 x 10 |
Drive/Steering option | 10 x 8 x 10 |
Driving speed | 85.00 km/h |
Total ballast | 45.00 t |
ECOmode minimises both fuel consumption and noise emissions when operating the crane superstructure. The crane operator sets the required working speed using the control lever. The crane control system calculates the perfect engine speed for the diesel engine.
ECOdrive makes the mobile crane significantly more comfortable and quieter by reducing the engine speed. Faster gearshifting delivers greater dynamic and traction offroad. On the road, the torque from the Liebherr diesel engine is used efficiently to minimise fuel consumption.
Take one engine out to increase lifting capacity. Or more accurately – the superstructure is powered by the undercarriage engine. Gear shafts are routed from the distributor gear in the substructure via two mitre gears to the pump distributor gear in the superstructure. That enables us to remove one engine – and we use this to increase the crane’s lifting capacity.
Hillstart-Aid makes starting on gradients easier. Move off safely and easily without rolling backwards.
VarioBase makes the crane’s support system variable. It enables each outrigger to be extended to a different length. This enhances safety – particularly in constricted spaces. And what's more, the crane’s lifting capacities are significantly increased, particularly over the outriggers and depending on the configuration.
The AutoBallast function completes the ballasting process automatically. All the steps are carried out after the button has been pressed just once.
Our customer portal MyLiebherr is your entrance to the Liebherr service world. It gives you access to extensive basic and additional services for your mobile and crawler cranes