Precise – reliable – cost-effective
This is the chamfering process.
Advantages
The ChamferCut process
- Very precise chamfer geometry
- Premium chamfer quality and reproducibility
- No bulging or material deformation
- Standard tooth-root chamfering
- Established process in gear production
- Very long tool life
- ChamferCut tools can be re-sharpened approx. 20 times easily and cost-effectively
- Lower tool costs compared to alternative processes
- Short amortization period due to low tool costs
- Applications for gears with module 0.8-42 mm
- 2nd cut not needed for gear hobbing - longer tool life for the hobbing tool
- Short setup time
Videos
- ChamferCut
- LC 180 DC
- LC 300 DC
- LD 300 C
ChamferCut
ChamferCut
Economic efficiency
Workpiece (chamfering) | |||
Workpiece | speed gear | ||
Module | 2.7 mm | ||
Number of teeth | 41 | ||
Helix angle | 24.5° | ||
Press chamfering (with burnishing) | ChamferCut | ||
Press chamfering tool | 4,700 Euro | Chamfer cutter (set) | 3,600 Euro |
Number of re-sharpenings | 1 | 23 | |
Total workpieces | 95,445 | 468,293 | |
Tool costs/workpiece | 6.7 cents | 1.5 cents |
After chamfering with the patented ChamferCut technology, no additional machining is necessary. There is no need for a second cut, which is often required during the deformation-based deburring process for the removal of build-up material. With the chamfering process, the exact chamfer form is produced. In contrast to deformation-based processes, the material structure is not affected. An optimal starting point is created for the subsequent finishing of hardened gears, particularly gear honing. The quality of such chamfers defines a new standard – with maximum repetitive accuracy.