FAQ: Urea distribution systems and accessories

Urea solution is a mixture of urea (organic compound) and pure demineralized water as defined by the standard ISO 22241. This standard imposes strict manufacturing and storage procedures, which guarantee the purity for proper operation of your machine. In other words, you are obligated to ensure the purity of the urea solution from the time of receipt up until its injection into the specific tank at the machine.

Registered trademark, a synonym for urea solution.

With the use of the urea solution in the SCR (Selective Catalytic Reduction) system of the machine, the exhaust gas emissions standards are satisfied. For this purpose, the urea solution is injected into the SCR system in order to transform the nitrogen oxides (NO_x), which are harmful pollutants, into water (H₂O) and nitrogen (N₂), which are both harmless substances. (The air that we breathe contains more than 75% nitrogen).

Contamination of the urea solution, for example due to improper storage and / or handling, leads to disruption or even contamination of the SCR system, which is very vulnerable. This contamination can result in non-compliance with anti-pollution standards, impaired operation of your machine and even a complete failure, as well as material damage.

Damage resulting from the use of a contaminated urea solution or another unsuitable fluid (does not satisfy standard ISO 22241) is not covered by the manufacturer's warranty.

Purchase the urea solution from your Liebherr Service Partner. The solution should have the ISO 22241 certification. In other words, the word AdBlue^® or a reference to the standard ISO 22241 should appear on the product packaging.

• Protect your urea solution against all types of contamination such as fuel, oil, grease, water, dust, dirt, metals and detergents.
• Only use accessories specifically for the urea solution (for example pistol) or for single use (for example canisters, filling tubes, etc.).
• Keep the AdBlue^® equipment clean and free of dust and dirt. Cleaning or flushing with water also helps to prevent the urea solution remains to form crystals when drying.
• The urea solution should only be poured into the special tank at the machine with a pistol specifically for the urea solution. On Liebherr machines, the tank for the urea solution is located near the fuel tank of the machine and can be easily identified with its blue cap.
• Do not start the engine if the urea solution was by mistake injected into the diesel tank of the machine or if a fluid, which does not satisfy the standard ISO 22241, was inserted by error in one of the other tanks of the machine.
• Monitor the filling level of the tank for the urea solution.
• It is recommended to wear waterproof gloves (see spare part documentation), as well as protective goggles. Slight irritations may occur in contact with the skin. In case of contact with the skin and eyes, rinse thoroughly with water.
• If the shipping container is damaged, please contact your Liebherr Service Partner from whom you purchased the urea solution.
• Do not dispose the urea solution into sewerage. Unused / contaminated AdBlue^® should be treated as special waste.