LHM 180

Mobile Harbour Crane

Whether it is containers, bulk or general cargoes - with a maximum outreach of 35 metres and a capacity of 64 tonnes the LHM 180 is the right handling solution for feeder and handysize ships. The LHM 180 impresses with its mobility and flexibility, particularly in inland ports.

Lifting capacity (max.) - 64 t
64 t
Jib length - 35 m
35 m
Total weight - 165 t
165 t
Hoisting/lowering max. - 90 m/min
90 m/min

Sales

Service

Used Equipment Marketplace

Features

The four struts (lattice design) of the boom provide maximum stability and handle the sideways pull better than alternative boom designs. This results in a longer service life.

The pull cylinder over the boom offers many advantages: no collision with swinging load, no buckling of the cylinder and full protection of the piston rod in park position.

Closed hydraulic loops are used for all main functions such as lifting, turning and luffing. The crane operator benefits from extremely precise control, the service personnel benefit from a minimum number of components and the operating company benefits from reduced fuel consumption.

To defy the rough maritime environmental conditions, the standard paintwork comprises a primer coat, an intermediate coat and a top coat.

Optimal views for the operator. The forward-mounting position of the tower cab with 70% glass (safety glass) offers the driver a comprehensive visibility range.

Like all maritime cranes from Liebherr, our mobile harbour crane can rely on a dense service network worldwide. This ensures short downtimes and a quick response.

Noise protection, windshield wiper, air conditioning. The ergonomic and comfortable features of the cab increase the concentration and reduce the fatigue of the crane operator – for consistently high productivity and a high level of safety.

The safety of people, the infrastructure and the environment takes top priority. Our mobile harbour crane has a number of precautionary measures for increased safety in your port.

The synchronisation of the winches is monitored and optimised by the four-rope grab control.

The individual wheel sets of the LHM undercarriage enable movement in all directions and thus 360-degree mobility.

The star-shaped supporting base reduces the torsion strain on the steel structure, enhances the service life of the slewing ring and guarantees optimal vertical stability during operation.

The hydraulic combination of the wheel sets in three groups prevents overloading of the individual wheel sets and the ground. The grouping also ensures maximum stability when manoeuvring the crane.

All wheel sets are steerable and have load balancing. Ground pressures of six tonnes for each wheel are not exceeded. Accessibility from all sides guarantees easy maintenance.

Operation without a loss of productivity is also possible when it is dark. High-performance LED headlights at the boom and tower provide optimal lighting.

The round tower design minimises damage caused by torsion. Forces are evenly distributed to the steel structure and the slewing ring. As a result, the service life of the crane is increased significantly.

The tail swing is within the support base for all crane types in the LHM series. The risk of collision with passing machines is thus avoided. The crane operator can concentrate solely on his work.

During luffing the load always moves along the horizontal load path.

The speed of the special Howden coolers is automatically adapted to cooling requirements. As a result, diesel consumption and noise levels are reduced to a minimum and the service life is maximised.

The control system of the mobile harbour crane range, which was developed by Liebherr, focuses on precision, safety and productivity. Obtain a detailed overview here.

The single-storey slewing platform houses the drive unit, slewing mechanisms and hoist mechanisms, the control cabinet room and the alternator. All components are easily accessible for maintenance work.

All electric and electronic components used satisfy military standards. External environmental conditions have no impact on the functionality. The entire system was developed for the maritime environment with temperatures from -40°C to +80°C.

A slack rope protection device is mounted on the winch frame. The winding on the winch is effected evenly, and the hoist rope is always kept taut.

The Liebherr mobile harbour crane is equipped with the latest generation of diesel engines for the exhaust emissions standards of EU stage V or EPA Tier 5 final.

Regular servicing maintains the efficiency of the crane. So maintenance work can be carried out quickly, the accessibility of the relevant components is to the fore. This reduces downtimes.

The machine housing panels are made from glass fibre reinforced plastic. The advantages include low weight and resistance to rust.

Technical data

Downloads

Optional equipment

LHM 180

Used machines

Areas of application

Maritime technology

Contact