Deep foundation
liebherr-schlitzen-schlitzwand-fraese-dydromill-slurry-wall-cutter-hs8130-stage-min

Slurry wall cutter

Hydromills are used for very deep trenches and, above all, for very hard building ground. Unlike the grab a hydromill works continuously during excavation. With the help of cutting wheels the building ground is broken up and crushed. A pump inside the hydromill creates an upward flushing circuit out of the trench via hose lines. The loosened cuttings can so be conveyed out of the trench with the support fluid that is pumped to the surface. Thus contaminated support fluid is then cleaned in a treatment plant and fed into the trench again.

liebherr-hydromill-schlitzwandfraese-min
liebherr-methode-herstellung-method-schlitzen-mit-frsese-hydromill-slurry-wall-cutter-min

Slurry wall production using cutting technique

1. Cutting of the second part of a long, three-part primary trench

2. Cutting of the third part

3. Excavation of the short secondary trench between two long primary trenches

liebherr-schlitzwand-fraese-slurry-wall-cutter-package

Slurry wall cutter package

The package consists of a hydromill trench cutter, a duty cycle carrier machine, a hose drum system and a corresponding separation plant.

01/07

Animated video

Hydraulically driven hydromills produce slurry walls.

liebherr-schlitzen-schlitzwand-fraese-hydromill-lsc-8-18-job-report-munich-min

Slurry wall cutter LSC 8-18

Expansion of the rail network in Munich.

Slurry wall jobsite in Naples

Machines

Results 1–2 of 2

Get in touch

If you have any further questions, please contact our local sales or service team.