More about the company
Liebherr careers
Soil Mixing
For wet soil mixing the mixing tools rotate around the vertical axis of the mixing shaft. The tools break up the soil matrix and mix the suspension with the soil. The binding agents used are usually cement types mixed to a suspension by adding water.
Procedure for 1-fold soil mixing
1. Positioning of mixing tool
2. Drilling down the mixing tool while injecting suspension
3. Mixing of the soil down to final depth
4. Extraction of the mixing tool and further thorough mixing while injecting suspension
5. Completed soil mixing column
Procedure for 3-fold soil mixing
1. Positioning at the mixing point
2. Drilling down the mixing tool while injecting suspension
3. After reaching the final depth, further thorough mixing and start of extraction
4. Extraction of the mixing tool and further thorough mixing while injecting suspension
5. Completed soil mixing element
Wet mixing with single mixing tool
For wet soil mixing the individual soil-mix elements are often executed in specific grid patterns, such as for stabilisation columns under shallow foundations in road construction.
Mixing drives as modular system
The mixing drives for uncased wet mixing can be modularly combined with each other. Very frequently multiple mixing tools are used. Thus, panel shaped reinforced ground structures are produced.
Mixing tool for uncased wet mixing
The mixing tool consists of a hollow drilling linkage fitted with blades, knives or paddles at its lower end.
Introducing the suspension in the ground
The binding agent suspension is pressed into the soil through nozzles situated in the lower area of the mixing tool.
Producing a homogeneous soil mix column
The soil is further mixed during extraction of the mixing tool and further binding agent is injected.
Installation of a cut-off wall for redevelopment of an embankment
An LRB 125 in wet mixing application with triple mixing equipment and longitudinal mounting.
Cut-off wall as foundation pit enclosure
LRB 125 with double mixing equipment in longitudinal mounting for cut-off wall installation.
Video wet soil mixing
The video shows the production of soil mixing elements using the wet soil mixing process.
This YouTube video is provided by Google*. If you load the video, your data – including your IP address – is transmitted to Google and may be stored and processed by Google inter alia in the USA. We have no influence over further data processing by Google.By clicking on ‘Accept’, you consent to the transmission of data to Google for this video in accordance with Art. 6 (1) (a) GDPR and at the same time explicitly consent to the transfer of data to the USA in accordance with Art. 49 (1) (a) GDPR. If you no longer wish to consent to each YouTube video individually in the future and wish to be able to load the videos without this blocker, you can also select ‘Always accept YouTube videos’ and thereby consent to the associated data transmissions and transfers to Google and to the USA for all other YouTube videos which you open on our website in the future. Please note that, in the opinion of the European Court of Justice, there does not currently exist an adequate level of data protection in line with EU standards in the USA, and at present we cannot provide appropriate safeguards to protect your data and offset this shortcoming.Possible risks to you of data transfer to the USA are that access by state authorities cannot be excluded and that your data could be processed for reasons of national security, law enforcement or for other purposes in the public interest of the USA, possibly without you being informed separately and without enforceable rights and effective legal remedies being available to you.You can withdraw consent that you have given at any time with future effect via the settings. For further information, please see our Data Protection Declaration and Google’s Privacy Policy.*Google Ireland Limited, Gordon House, Barrow Street, Dublin 4, Ireland; parent company: Google LLC, 1600 Amphitheatre Parkway, Mountain View, CA 94043, USA